Technical Features:

● Synchronous belt stepping type loading, loading on the pulling belt, NG discharging platform, discharging NG material, unloading on the flat belt

● Positive and negative core detection on the loading belt.

● Welding is individually divided into positive and negative lugs pre-welding, the main welding of positive and negative lugs TAB.

● After welding, there are welding point burr treatment and welding powder absorption function.

● Positive and negative lugs are taped with U-shape wrapping tape, and L-shape tape is applied to fix the lugs.

● The material pulling belt and the NG material platform automatically prompts the alarm and stops the machine when the core is full, and the alarm is automatically lifted and the machine resumes operation after the material is taken away.

● Interlocking mode for both front and rear action sequence.

● The incoming test defective cells are automatically recognized and put into the NG area automatically.

● Core welding is divided into lug pre-welding and tap main welding, welding is firm, no false welding, no vibration powder, no burning diaphragm, no hot insulation glue, no vibration crack lug pole piece.

● The manipulator transferring the core adopts the form of clamping, no damage to the core.

● Changing the type only requires replacing the fixture plate, and other mechanisms can be realized with minor adjustments.

● Before welding and gluing, the core is repositioned, and after positioning, it is pressed by pneumatic cylinder to ensure the precision of welding and gluing.