In the installation process of the screws, the torque value will be preset first, and the system will automatically hit the screws. After playing it will light up, if missed, the system will alarm, and then the light will turn red, the whole automated operation. Then began to install the customized charging gun, after installing the charging gun, it came to the test of automatic metering maneuver. The whole outer frame is closed during the test, and the whole process is automated. When the device goes in, it automatically connects for testing.

After the test, it goes to the workbench where the last few parts are loaded, and then it goes to the aging rack. We have a strict aging test for all of our products. Inside this aging room, various extreme conditions are simulated, and then the reliability and endurance of the products are tested.

For example, if the temperature is raised to 60 degrees, whether it operates normally under the working condition of 60 degrees. If there is a problem, the system will report an error and it will tell you which one has a problem. In such a high temperature, people can not put the machine directly into the. This time we need to use AGV small machine to operate. Just need to give it a command, it will automatically move the product to the free aging rack, the whole transportation process without human intervention.

After all the tests are done, the products will be sampled according to a certain percentage to see whether they are qualified and whether there will be any omissions. Only after passing the sampling inspection can the products be packed. The whole production line is a new introduction of the country's first-class AC pile production line, only 150 seconds to produce a product, the annual output can reach 70,000 units. And the whole process data of each charging pile will be recorded automatically, which is convenient for tracking and tracing.