Oven assembly line

It mainly consists of chain plate conveyor line. The conveyor surface of the chain plate conveyor is flat and smooth with low friction, so that it can convey the oven accessories and assemble them with ease.

The chain plate line adopts the special rail for plate folding chain plate line, while the sub guide rail is made of angle iron.

Among the transmission chain is adopted industrial special chain plate line chain;

Lighting is a single T8LED fluorescent lamp with cover, installed continuously on both sides;

The tool hanging rail adopts special wind batch hanging rail aluminum, and a set of wind batch pulley is installed every meter on both sides.

In addition, the process of watching the board using special double-bar H-type aluminum as a bracket, every meter configuration of a set of acrylic panels;

The air pipe made of 6-point galvanized and the foot made of galvanized foot cups together escort the conveyance of the chain plate line, which can strongly ensure the smooth operation of the production line.

Adopt curved plate roller chain as the transmission medium and insulated epoxy resin plate as the chain plate;

Through the internal conductive form of coupling board surface various specifications of sockets, so that the product in the case of energized constantly aging test.

Oven aging test line is mainly divided into three stages, including the transition stage, air-cooled stage and burn-in stage.

Transition stage and air-cooled stage of the power part and configuration are the same, are used in conjunction with the motor drive, the guide rail used in the aluminum profile times the speed of the chain special guide;

The transmission chain adopts the industrial special triple speed chain;

Burner detection is used to detect the current, voltage and identify the oven good or bad.

The power part adopts bang fixed speed motor running, burner adopts conductive rail carbon brush type conductive brush, transmission part adopts green non-slip belt transmission;

Recognition of memory using chip cards, each two sets of testing stations with a set of recognition memory, recognition and memory of each machine is good and bad whether the burner;

Boiler by collecting current, voltage, power using sensors and transformers to collect data, and then identify the parameters of the machine and its good and bad;

Each station with an alarm lamp, so that if there is a bad machine can automatically alarm, portable effect.